STANCOR 84-912

The 184-918 is a general-purpose relay manufactured by STANCOR. With an input AC coil voltage of 208/240, this relay is designed to efficiently switch power. Its compact design and high-quality construction make it suitable for a wide range of applications. The STANCOR DSW-632 is a printed circuit transformer known for its reliability and performance. This transformer is designed to provide efficient power conversion and is ideal for use in various electronic devices. Its compact size and durable construction make it easy to integrate into any circuit. The P-8603 is a transformer manufactured by STANCOR. With a primary voltage of 117VAC and a secondary voltage of 800mA 28V, this transformer is designed to provide reliable power conversion. Its compact and sturdy design makes it suitable for a variety of applications. The STA-4125T is an external plug-in AC-DC converter manufactured by STANCOR. With a power supply approval for ITE and a maximum output power of 1.25W, this converter is designed to provide efficient and reliable power. Its compact size and easy installation make it ideal for use in various electronic devices. The GIS-100 is an isolation transformer manufactured by STANCOR. With primary voltages of 115V and secondary voltages of 115VAC, this transformer is designed to provide safe and reliable electrical isolation. Its high current rating and power rating of 100VA make it suitable for a wide range of applications. The ST0-160 is a thermostat manufactured by STANCOR. With a bimetal disc body material and a contact rating of 15A at 120VAC, this thermostat is designed to provide accurate temperature control. Its 1/4 inch quick connect mounting type and maximum operating temperature of 74°C make it easy to install and use. The TGC80-230 is a power transformer manufactured by STANCOR. With primary voltages of 2 x 115V and secondary voltages of 2 x 115V, this transformer is designed to provide efficient power conversion. Its current rating of 700mA and power rating of 80VA make it suitable for a variety of applications. The TGC43-10 is a power transformer manufactured by STANCOR. With primary voltages of 115/230V and secondary voltages of 2 x 5V, this transformer is designed to provide reliable power conversion. Its current rating of 8.6A and power rating of 43VA make it suitable for a wide range of applications. The STA-4860A is a power supply AC adapter manufactured by STANCOR. With an input voltage of 120VAC and a frequency of 60Hz, this adapter is designed to provide reliable power. Its compact and lightweight design makes it ideal for use with various electronic devices. The P-8617 is a power transformer manufactured by STANCOR. With a chassis mount transformer type and secondary voltages of 2 x 24V, this transformer is designed to provide efficient power conversion. Its power rating of 48VA and dual primary, dual secondary winding type make it suitable for a variety of applications. The P-8687 is a transformer manufactured by STANCOR. With a primary voltage of 115V/60Hz and a secondary voltage of 9V, this transformer is designed to provide reliable power conversion. Its current rating of 2-8A RMS makes it suitable for use in various electronic devices. The P-6133 is a transformer manufactured by STANCOR. With a filament voltage of 117V and a frequency of 60CY, this transformer is designed to provide efficient power conversion. Its compact size and durable construction make it suitable for use in a variety of applications. The LB-2120 is a split bobbin-printed circuit transformer manufactured by STANCOR. With a low-profile design, this transformer is ideal for space-constrained applications. Its high-quality construction ensures reliable performance and durability. The P-8600 is a power transformer manufactured by STANCOR. With a voltage rating of 1500VRMS and 5-term wire lead flange mount, this transformer is designed to provide efficient power conversion. Its compact size and wire lead flange mount make it easy to integrate into any circuit. The STA-6624-9 is a transformer adapter manufactured by STANCOR. With a power output of 54W and a voltage output of 24VDC, this adapter is designed to provide reliable power conversion. Its compact and lightweight design makes it ideal for use with various electronic devices. The STA-4182A-4 is an AC/DC adapter manufactured by STANCOR. With a compact and lightweight design, this adapter is ideal for use with various electronic devices. Its reliable performance and compatibility with standard power outlets make it a versatile and convenient power solution. The DSWC-712 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide efficient power conversion. Its sturdy construction and easy installation make it ideal for use in various applications. The DSWC-636 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide reliable power conversion. Its compact size and durable construction make it suitable for a wide range of applications. The DSWC-610 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide efficient power conversion. Its high-quality construction and easy installation make it suitable for use in various electronic devices. The DSWC-456 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide reliable power conversion. Its compact size and sturdy construction make it ideal for use in a variety of applications. The DSWC-428 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide efficient power conversion. Its high-quality construction and easy installation make it suitable for use in various electronic devices. The DSW-232 is a printed circuit transformer manufactured by STANCOR. With a dual side winder design, this transformer is ideal for use in various electronic devices. Its reliable performance and compact size make it easy to integrate into any circuit. The DSWC-524 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide efficient power conversion. Its sturdy construction and compact size make it suitable for a wide range of applications. The DSWC-516 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide reliable power conversion. Its compact size and durable construction make it ideal for use in a variety of applications. The STA-4820B is an AC/DC adapter manufactured by STANCOR. With an output voltage of 20V and a power supply approval, this adapter is designed to provide reliable power. Its compact and lightweight design makes it ideal for use with various electronic devices. The STA-3512E is a power source (wall plug-in) manufactured by STANCOR. With a DC voltage of 120, this power source is designed to provide efficient and reliable power. Its compact size and easy installation make it suitable for a variety of applications. The ST301S12010 is a sealed power transformer from the ST30 series manufactured by STANCOR. With an input voltage of 115V and a single output, this transformer is designed to provide reliable power conversion. Its sealed construction ensures durability and long-lasting performance. The ST301S12006 is a sealed power transformer from the ST30 series manufactured by STANCOR. With an input voltage of 115V and a single output, this transformer is designed to provide efficient power conversion. Its compact size and high-quality construction make it suitable for a wide range of applications. The ST301S06010 is a sealed power transformer from the ST30 series manufactured by STANCOR. With an input voltage of 115V and a single output, this transformer is designed to provide reliable power conversion. Its compact size and durable construction make it ideal for use in various electronic devices. The DSWC-748 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide efficient power conversion. Its sturdy construction and easy installation make it suitable for use in various applications. The DSWC-410 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide reliable power conversion. Its compact size and durable construction make it ideal for use in a wide range of applications. The 42EF35AFR is a definite purpose contactor manufactured by STANCOR. With its high-quality construction and reliable performance, this contactor is designed to provide efficient control of electrical power. Its compact size and easy installation make it suitable for use in various industrial applications. The 3F05-2 is a fan control manufactured by STANCOR. With a 3/4" snap disc and a temperature range of 140 to 180 degrees F, this fan control is designed to provide precise temperature regulation. Its easy-to-use tab-to-screw terminal design ensures simple installation and secure connection. The DSWC-510 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide efficient power conversion. Its compact size and sturdy construction make it ideal for use in a variety of applications. The LB-1215 is a split bobbin-printed circuit transformer manufactured by STANCOR. With its low-profile design, this transformer is perfect for applications where space is limited. Its high-quality construction ensures reliable performance and durability. The DSWC-620 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide efficient power conversion. Its compact size and durable construction make it suitable for use in various electronic devices. The DSWC-424 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide reliable power conversion. Its compact size and sturdy construction make it ideal for use in a variety of applications. The DSWC-728 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide efficient power conversion. Its sturdy construction and easy installation make it suitable for use in various applications. The DSWC-716 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide reliable power conversion. Its compact size and durable construction make it ideal for use in a variety of applications. The DSWC-710 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide efficient power conversion. Its high-quality construction and easy installation make it suitable for use in various electronic devices. The DSWC-612 is a power transformer manufactured by STANCOR. With a chassis mount and dual primary voltage of 115/230VAC, this transformer is designed to provide reliable power conversion. Its compact size and sturdy construction make it ideal for use in a variety of applications. The 42AF35AJ is a definite purpose contactor manufactured by STANCOR. With its high-quality construction and reliable performance, this contactor is designed to provide efficient control of electrical power. Its compact size and easy installation make it suitable for use in various industrial applications. The P-8654 is a relay manufactured by STANCOR. With its high-quality construction and reliable performance, this relay is designed to provide efficient control of electrical circuits. Its compact size and easy installation make it suitable for use in various applications. The DSW-348 is a printed circuit transformer manufactured by STANCOR. With its dual side winder design, this transformer is ideal for use in various electronic devices. Its compact size and high-quality construction make it easy to integrate into any circuit. The STO-220B1 is a power adapter manufactured by STANCOR. With its compact and lightweight design, this adapter is perfect for use with various electronic devices. Its reliable performance and compatibility with standard power outlets make it a versatile and convenient power solution. The PPC-6 is a power transformer manufactured by STANCOR. With its compact size and durable construction, this transformer is designed to provide efficient power conversion. Its high-quality materials and reliable performance make it suitable for use in a variety of applications. The TG30-10 is a power transformer manufactured by STANCOR. With primary voltages of 115/230V and secondary voltages of 2 x 5V, this transformer is designed to provide efficient power conversion. Its current rating of 6A and power rating of 30VA make it suitable for a wide range of applications. The TG56-28 is a power transformer manufactured by STANCOR. With primary voltages of 115/230V and secondary voltages of 2 x 14V, this transformer is designed to provide reliable power conversion. Its current rating of 4A and power rating of 56VA make it suitable for a variety of applications. The TG10-24 is a power transformer manufactured by STANCOR. With primary voltages of 115/230V and secondary voltages of 2 x 12V, this transformer is designed to provide efficient power conversion. Its current rating of 840mA and power rating of 10VA make it suitable for a wide range of applications. The RT-208 is a power transformer manufactured by STANCOR. With its panel mounting and power transformer type, this transformer is designed to provide reliable power conversion. Its high output current of 15A and external depth of 5.25 make it suitable for various applications. The TGC25-36 is a power transformer manufactured by STANCOR. With an output voltage of 222V and a power rating of 25VA, this transformer is designed to provide efficient power conversion. Its compact size and sturdy construction make it suitable for use in a variety of applications. The TG10-36 is a power transformer manufactured by STANCOR. With primary voltages of 115/230V and secondary voltages of 2 x 18V, this transformer is designed to provide reliable power conversion. Its current rating of 560mA and power rating of 10VA make it suitable for a wide range of applications. The LB-256 is a split bobbin-printed circuit transformer manufactured by STANCOR. With its low-profile design, this transformer is perfect for applications where space is limited. Its high-quality construction ensures reliable performance and durability. The T40-24M3 is a class 2 transformer manufactured by STANCOR. With its input voltage of 120/208/240 at 60Hz, this transformer is designed to provide efficient power conversion. Its compact size and high-quality construction make it suitable for use in various electronic devices. The 45CG20EF is an electromechanical relay manufactured by STANCOR. With its high-quality construction and reliable performance, this relay is designed to provide efficient control of electrical circuits. Its compact size and easy installation make it suitable for use in various applications. The STAF-2100F is a wall mount AC adapter manufactured by STANCOR. With its European power source compatibility, this adapter is designed to provide reliable power conversion. Its compact and lightweight design makes it ideal for use with various electronic devices. The TTPC-14 is a transformer manufactured by STANCOR. With its compact size and high-quality construction, this transformer is designed to provide efficient power conversion. Its reliable performance and durability make it suitable for a variety of applications. The TGC130-36 is an international transformer from the TGC series manufactured by STANCOR. With its chassis mount design and power rating of 130VA, this transformer is ideal for international power conversion. Its high-quality construction and compact size make it suitable for use in various electronic devices. The SWC-456 is a power transformer manufactured by STANCOR. With its chassis mount and single primary voltage of 115VAC, this transformer is designed to provide efficient power conversion. Its compact size and sturdy construction make it ideal for use in a variety of applications. The TGC43-20 is an international transformer from the TGC series manufactured by STANCOR. With its chassis mount design and power rating of 43VA, this transformer is ideal for international power conversion. Its high-quality construction and compact size make it suitable for use in various electronic devices. The TGC43-16 is an international transformer from the TGC series manufactured by STANCOR. With its chassis mount design and power rating of 43VA, this transformer is ideal for international power conversion. Its high-quality construction and compact size make it suitable for use in various electronic devices. The SWC-448 is a power transformer manufactured by STANCOR. With its chassis mount and single primary voltage of 115VAC, this transformer is designed to provide efficient power conversion. Its compact size and sturdy construction make it ideal for use in a variety of applications. The SWC-416 is a power transformer manufactured by STANCOR. With its chassis mount and single primary voltage of 115VAC, this transformer is designed to provide reliable power conversion. Its compact size and durable construction make it ideal for use in a wide range of applications. The ST301S15015 is a sealed power transformer from the ST30 series manufactured by STANCOR. With an input voltage of 115V and a single output, this transformer is designed to provide efficient power conversion. Its sealed construction ensures durability and long-lasting performance. The ST301S09006 is a sealed power transformer from the ST30 series manufactured by STANCOR. With an input voltage of 115V and a single output, this transformer is designed to provide efficient power conversion. Its compact size and high-quality construction make it suitable for a wide range of applications. The SWC-424 is a power transformer manufactured by STANCOR. With its chassis mount and single primary voltage of 115VAC, this transformer is designed to provide efficient power conversion. Its compact size and sturdy construction make it ideal for use in a variety of applications. The SWC-820 is a power transformer manufactured by STANCOR. With its chassis mount and single primary voltage of 115VAC, this transformer is designed to provide reliable power conversion. Its compact size and durable construction make it ideal for use in a variety of applications. The P-8362B is a low current control transformer manufactured by STANCOR. With its compact size and low ampere rating of 0.15, this transformer is designed to provide efficient power conversion. Its input voltage of 117V and 50/60Hz frequency make it suitable for use in various electronic devices. The LB-4120 is a split bobbin-printed circuit transformer manufactured by STANCOR. With its low-profile design, this transformer is perfect for applications where space is limited. Its high-quality construction ensures reliable performance and durability. The SWC-710 is a power transformer manufactured by STANCOR. With its chassis mount and single primary voltage of 115VAC, this transformer is designed to provide efficient power conversion. Its compact size and sturdy construction make it ideal for use in a variety of applications. The SWC-656 is a power transformer manufactured by STANCOR. With its chassis mount and single primary voltage of 115VAC, this transformer is designed to provide reliable power conversion. Its compact size and durable construction make it ideal for use in a wide range of applications. The SWC-620 is a power transformer manufactured by STANCOR. With its chassis mount and single primary voltage of 115VAC, this transformer is designed to provide efficient power conversion. Its high-quality construction and easy installation make it suitable for use in various electronic devices. The SWC-748 is a power transformer manufactured by STANCOR. With its chassis mount and single primary voltage of 115VAC, this transformer is designed to provide reliable power conversion. Its compact size and sturdy construction make it ideal for use in a variety of applications. The SWC-636 is a power transformer manufactured by STANCOR. With its chassis mount and single primary voltage of 115VAC, this transformer is designed to provide efficient power conversion. Its compact size and durable construction make it suitable for use in a wide range of applications. The 705354 is a rubber sanding drum pack manufactured by STANDARD ABRASIVES. With a size of 13 x 38mm x 1/4, this pack includes 10 rubber sanding drums. Its high-quality rubber construction ensures durability and long-lasting performance. The STA-840185 is a surface conditioning disc manufactured by STANDARD ABRASIVES. With a diameter of 1 inch and a medium-grade, this box includes 50 surface conditioning discs. Its high-quality construction and effective surface conditioning make it suitable for various applications. The 640408 is a flap wheel manufactured by STANDARD ABRASIVES. With a diameter of 4 inches and a maximum RPM of 12000, this flap wheel is made from aluminum oxide. Its high-quality construction ensures durability and efficient material removal. The 854053 is a plus wheel manufactured by STANDARD ABRASIVES. With a diameter of 6 inches and a thickness of 1/2 inch, this wheel has a fine grade and is suitable for various applications. Its high-quality construction and reliable performance make it a versatile tool for surface preparation. The 572505 is a quick change TP disc pack manufactured by STANDARD ABRASIVES. With a size of 3 inches and a 60 grit, this pack includes 50 quick change TP discs. Its high-quality construction and effective material removal make it suitable for various applications. The 051115-42499 is a standard abrasives A/O flap wheel manufactured by STANDARD ABRASIVES. With a size of 15" x 5" x 25" and a grit of 80, this flap wheel is designed for efficient material removal. Its high-quality construction ensures durability and long-lasting performance. The 522303 is a quick change disc manufactured by STANDARD ABRASIVES. With a 2-ply design and a 40 grit, this disc is designed for efficient material removal. Its high-quality construction and easy installation make it suitable for various applications. The 522508-3 is a quick change disc manufactured by STANDARD ABRASIVES. With a 2-ply design and a 120 grit, this disc is designed for efficient material removal. Its high-quality construction and easy installation make it suitable for various applications. The 522505-EA is a sanding disc manufactured by STANDARD ABRASIVES. With a laminated quick-change design and a 60 grit, this disc is designed for efficient material removal. Its high-quality construction and easy installation make it suitable for various applications. The 522505 is a quick change disc manufactured by STANDARD ABRASIVES. With a 2-ply design and a 60 grit, this disc is designed for efficient material removal. Its high-quality construction and easy installation make it suitable for various applications. The 840488 is a surface conditioning GP disc pack manufactured by STANDARD ABRASIVES. With a size of 3 inches, this pack includes 25 surface conditioning GP discs. Its high-quality construction and effective surface conditioning make it suitable for various applications. The 840481/EACH is a surface conditioning FE disc manufactured by STANDARD ABRASIVES. With a size of 3 inches, this disc is designed for efficient surface conditioning. Its high-quality construction and durable performance make it suitable for various applications. The 051115-36905 is a standard abrasives SA 840036 AVFN disc manufactured by STANDARD ABRASIVES. With a size of 3/4 inch and an intsmqs75km, this disc is designed for efficient material removal. Its high-quality construction and reliable performance make it suitable for various applications. The 051115-36848 is a standard abrasives QC surf cond GP DC 840588 disc manufactured by STANDARD ABRASIVES. With a size of 4 inches, this disc is designed for efficient surface conditioning. Its high-quality construction and durable performance make it suitable for various applications. The 7000121650 is a quick change disc attachment manufactured by STANDARD ABRASIVES. With its type S attachment and non-woven material, this disc attachment is designed for efficient material removal. Its high-quality construction and easy installation make it suitable for various applications. The 7000047042 is a deburring wheel manufactured by STANDARD ABRASIVES. With a diameter of 6 inches, a face width of 1/2 inch, and a center hole of 1/2 inch, this deburring wheel is made from silicon carbide. Its soft grade and high-quality construction ensure efficient material removal and long-lasting performance. The 7010292742 is a deburring wheel manufactured by STANDARD ABRASIVES. With a diameter of 12 inches, a face width of 1/2 inch, and a center hole of 3/4 inch, this deburring wheel is made from silicon carbide. Its soft grade and high-quality construction ensure efficient material removal and long-lasting performance. The 7010368203 is a quick change disc attachment manufactured by STANDARD ABRASIVES. With its type R attachment and coated design, this disc attachment is designed for efficient material removal. Its high-quality construction and easy installation make it suitable for various applications. The 7000046917 is a deburring wheel manufactured by STANDARD ABRASIVES. With a diameter of 2 inches, a face width of 1/8 inch, and a center hole of 1/4 inch, this deburring wheel is made from aluminum oxide. Its hard density 8 grade and high-quality construction ensure efficient material removal and long-lasting performance. The 7000046878 is a quick change disc manufactured by STANDARD ABRASIVES. With a diameter of 3 inches, a medium grade, and a maroon color, this non-woven disc is designed for efficient material removal. Its lockit compatibility and high-quality construction make it suitable for various applications. The 7000121638 is a type S disc backing pad manufactured by STANDARD ABRASIVES. With a diameter of 1-1/2 inches and a 1/4 inch shank diameter, this disc backing pad is designed for efficient material removal. Its medium density and high-quality construction ensure durability and reliable performance. The 7000121886 is a deburring wheel manufactured by STANDARD ABRASIVES. With a diameter of 3 inches, a 1/4 inch center hole, and a fine grade, this deburring wheel is made from silicon carbide. Its density 5 soft grade and high-quality construction ensure efficient material removal and long-lasting performance. The 7000046835 is a quick change disc manufactured by STANDARD ABRASIVES. With a diameter of 3 inches, a maroon color, and a non-woven design, this disc is designed for efficient material removal. Its lockit compatibility and high-quality construction make it suitable for various applications. The 7000047047 is a deburring wheel manufactured by STANDARD ABRASIVES. With a diameter of 6 inches, a 1/4 inch face width, and a 1 inch center hole, this deburring wheel is made from silicon carbide. Its soft/medium grade and high-quality construction ensure efficient material removal and long-lasting performance. The 7000046877 is a quick change disc manufactured by STANDARD ABRASIVES. With a diameter of 3 inches, a coarse grade, and a brown color, this non-woven disc is designed for efficient material removal. Its lockit compatibility and high-quality construction make it suitable for various applications. The 7000046755 is an aluminum oxide non-woven hand pad manufactured by STANDARD ABRASIVES. With a rectangular shape and a size of 6 inches wide x 9 inches long, this hand pad is ideal for surface preparation. Its maroon color and high-quality construction ensure durability and effective material removal.

The 6319210 relay is a trip current relay with a nominal rating of 5.0A and a voltage rating of 1000VDC. This relay is designed for reliable and efficient trip current indication in various electrical applications.

The 6319203 is a versatile relay trip indicator that offers both 10.0-amp and 1.0-amp options. It provides reliable trip indication for various applications. Manufactured by E MAX, this high-quality product is designed to deliver exceptional performance and durability.

The LSA-08-311-001 from EAO is a solid state relay notification system operating at 20-30VDC with a 7.5mA notification rating. This reliable relay is ideal for melde system applications.

The P2410D by ECHOWELL is a 10A solid state relay designed for 240VAC with 3-32VDC input, ensuring reliable switching in various applications.

The P2440D by ECHOWELL is a robust 40A solid state relay engineered for 240VAC loads, providing a dependable solution for high-power switching needs.

The TH3KAD16000S/6000DDS Solid State Timer Relay by AIROTRONICS offers a 6000-second on/off delay, compatible with 120VAC, 50/60Hz power sources. The TH3KAD model ensures precise timing control for various applications.

The TDU-1006A5A Solid State Relay by AIROTRONICS offers a 120VAC input, a delay range of .2-6 seconds, and a DPDT relay output capable of handling up to 10A. Ideal for applications requiring reliable and precise timing control.

The TH3KAD1100/100DDS from AIROTRONICS is a Solid State Relay with timer delay functionality, operating at 120VAC, 50/60Hz. Featuring a solid-state design with external control for reliable performance.

The TXCP-3300A8 from AIROTRONICS is a solid state timer with a wide timing range of 30-300 seconds, ideal for precise control. Operating at 24VAC, it ensures accuracy and efficiency in timing applications.